| Sub Total | $ |
| Taxes | Province or State Tax will apply |
| Tire Levy | $ |
| Total Price | $ |
| Total Weight | lbs |
E5.0Weight: 3910 lbs |
$ |
Personalization |
$0 |
Yellow Green |
Included |
Exterior |
$0 |
Interior |
$0 |
See below finance estimate.
*Credit approval criteria includes down payment between 10% and 20% of the purchase price, excluding any applicable dealer charges, sales taxes, title and registration fees.
12,000 BTU non-ducted furnace provides heat through the trailer and is controlled by the included analog thermostat. This unit uses propane as fuel and 12V power from the batteries to run the fan and furnace ignition.
There are two roof vents in your trailer; the rearward is a static vent which includes a bug screen and a manually opening domed lid. This vent location is also pre-wired for an air conditioner. The forward vent is a MaxxFan, a bi-directional, thermostatically controlled 12V unit. It features a manually opening lid with a built in rain cover and the controls are located on the unit itself.
Front vent is a Maxx Fan
6 gallon one-way hot water tank is fueled by propane to heat water for use in the trailer.
This 7 cubic foot absorption refrigerator will run off of 120V, or Propane. It provides a separate, well sized, freezer compartment and a large fridge.
The 2 Burner Flush Mount Cooktop has a stainless steel body, glass cover and piezo electric ignition. The burners are fueled through propane. The piezo electric ignition runs on 12V power from the trailer battery.
Features stainless steel sink, residential style faucet and a plywood sink cover finished with your chosen formica.
12V Range Hood is vented to the outside of the trailer to reduce odours created from cooking.
12V Demand Water System (Water pump) pressurizes your water system so that you have running water to your sink, toilet, shower, etc when off-grid (no city water hookup).
This is a cabinet that has one 120V outlet that a customer can add a microwave after market.
Wrap Around Overhead Compartments maximise your overhead storage space at the dinette.
Hinged compartments underneath your dinette seats maximize storage space.
Kitchen Window over sink allows fresh air and natural light into the kitchen area.
Screen door separates from the main trailer door. This full-door screen allows fresh air into the trailer and stop bugs from entering.
Tension-based draw-down/push-up window shades block incoming light from outside. These shades are not blackout. Valences are used to cover the shade assembly and are finished with your chosen fabric.
Cushions are finished with your fabric choice on all sides except for the back, which is finished with a robust vinyl backing which can be easily cleaned.
8″ Plush Mattress features both springs and a cushioned topper making for an at-home level of comfort.
Power Bathroom Vent can be easily turned on/off to vent out the humid air created by a warm shower.
Fiberglass ‘wet bath’ features both the shower and the hand-flush toilet in the same space. The bathroom also features a sink and a waterproof toilet paper holder.
This non-waterproof mirrored cabinet can be used to store soap, shampoo, conditioner, pill bottles etc.
Provides non-dimmable spotlight like illumination which can be adjusted to suit your desired reading position. You have one light on either side at the head of the bed.
Winterizing T-Valve shuts off the flow of water from the fresh water tank to instead pull from an included tube which can be put into a bottle of antifreeze to winterize your system.
This port, connected to the supplied 20lb propane tanks, allows the user to supply a low-pressure propane appliance with fuel directly from the trailer (hose not included). We recommend Fairview Fittings – Model I4C180FS6QDN
Arms can be detached from body of trailer to make for a more established covered space. One side can be lowered (relative to the other) to allow for rain to run off the side of the awning. Extends up to 6′.
Framed windows are on horizontal sliders creating large openings that allow for a cross-breeze in the trailer. Rear window is a fixed window (non-opening)
Your Escape comes with two 20lb Propane Tanks, a regulator and an auto-changeover valve (switches from one tank to the other when empty), cover (also features a binary (green/red) display to indicate whether a tank has gas in it or not)
Vinyl Front Rock Guard protects the trailer from rocks/debris kicked up by your tow vehicle
Included 20′ Sewer Hose is used to hook up to sewer connection with the other end at the dump station. Included storage compartment has the following length: 19′ 66″
Exterior Bubble Levels allow you to get at-a-glance information on how level the trailer is.
The Exterior Grab Handle makes it easier to get into your trailer.
Single Entry Step can be easily folded up/down providing easier access in/out of the trailer.
Mud Flaps protect your trailer from getting muddy and also blocks from rocks/debris getting kicked up.
2” receiver located on the rear bumper allows you to add a bike rack to the unit. The total weight of bike rack & bikes cannot exceed 150lbs. This receiver cannot be used for double towing.
Tandem Torsion Rubber Ride Suspension provides a smooth, clean ride for both long stretches of highway and light off-road conditions.
10″ x 2 1/4″ Drum Brakes ensure that your trailer stops and slows down when you need it.
EZ-Lube Axles make it a breeze to lube your axles without the need to remove the wheel; by simply removing the front cover and rubber seal you can re-lube your axles quickly and easily.
Class D, ST205-075R-15, 8 ply, Bolt Pattern 5 on 4-1/2. Lug nuts are 13/16″ and non-locking. Comes on a steel rim painted white.
Full Size Spare is mounted on the standard steel rim, comes with a Canadian Maple Leaf Cover.
Stabilizer Jacks can be easily lowered with the provided tool to minimize side-to-side movement when parked.
The 5.0 Features two independently-controlled powered landing gears to easily hitch/unhitch. Controls are located in the D/S hatch (lockable) to easily extend/retract the landing gears. Manual Override is located in the upper front hatch (above the propane tank storage)
In the event that your trailer is fully disconnected from your tow vehicle the break-away switch will engage the trailer’s brakes to mitigate the potential for an accident.
The converter converts incoming 120V AC shorepower to 12V DC to charge your trailer’s battery.
12V Deep Cycle Lead-Acid battery provides approximately ~95Ah of storage.
Fixed Power Cord (permanently attached to the inside of the trailer) can be pulled out of/pushed into the hole to easily retrieve or stow the cord.
Battery Isolator Switch allows you to disconnect the battery from the system to prevent battery drain from 12V sensors (CO, propane, etc)
120V GFCI outlet is powered through shorepower.
12V/USB outlet is powered from the battery.
Interior Lighting is present throughout the centreline of the trailer as well as the sides (kitchen, dinette, etc). Exterior Lighting is located at either side of the trailer, one to the left of the entry door and the other above the dump valve(s).
120V Interior Outlets are powered through shorepower or the inverter (option).
These brake and signal lights ensure that other travellers behind you know where you’re going (or stopping).
The Oversized Emergency Exit Window (located at the Rear Driver’s Side) ensures that you can egress from the trailer in the event of an emergency.
There is a small fire extinguisher located near your kitchen in the event of a fire.
The propane detector is located near the fridge/oven to detect propane in the event of a propane leak.
Detects Carbon Monoxide or Smoke inside the trailer.
28 Gal. Tank located located under the belly of the trailer holds your freshwater (drinking water).
28 Gal. Greywater Tank located located under the belly of the trailer holds your greywater (from the shower/sink).
30 Gal. Blackwater Tank is located below the toilet, holds toilet waste.
Add custom graphics (limited to characters and numbers) to your trailer. Price will be determined based on the number of characters used and anticipates standard font size (std font size references the graphic font/size on the rear or side of the trailer). Any other size, font or colors would require a custom quote – see Custom Decal Graphics Plus. Please keep in mind that if you select the Rear Exterior LED Light option, this may impact the placement of your chosen graphic. It may be off-center or split.
*CHOOSE THE AMOUNT OF LETTERS YOU NEED.
*Please use notes to let us know what your graphics are going to say and where you would like them located on the trailer.
Add custom graphics (limited to characters) to your trailer. Custom price will be determined based on the number of characters, font, font size or colors. Please keep in mind that if you select the optional Rear Exterior LED Light it may impact the placement of your chosen graphic. It may be off center or split.
Remove the decalling on the trailer for a clean, egg-like look. Side decal only.
There are three different choices for the cabinetry. Oak, Maple or Contemporary.
Both the Maple and Contemporary options include frosted acrylic inserts for the upper cabinet doors.
The Oak upper cabinet door inserts are solid wood.
*PLEASE SELECT ONE CABINETRY ONLY
Choose the Formica for your countertops and tabletop from one of our seven standard selections.
The names of the countertops are in sequence with the last image.
*PLEASE SELECT ONE COUNTERTOP ONLY
Select your very own choice of Formica with a matte finish. Some conditions apply and our dedicated configuration specialists will be pleased to assist.
Visit Formica to select a countertop color, texture, and pattern to perfectly match your style.
*PLEASE CHOOSE ONE OPTION ONLY
This will finish the edge of your counters and tables.
*PLEASE SELECT ONE TRIM ONLY
Pick the perfect flooring to complement and tie together the personalization of your trailer. Choose from one of our standard choices or select your own in the Custom Flooring option.
*PLEASE SELECT ONE FLOORING ONLY
We recommend ordering flooring locally to eliminate shipping costs. Select your flooring choice from one of the links below and contact Olson Floors toll-free 1.877.823.0020 or 604-856-5766 to place your order.
Please choose from one of these partner sites Mannington, Armstrong Flooring, or Shaw Floors.
*Images are just a sample of available possibilities.
4″ high-density foam cushions are finished with your fabric choice on all sides except the back which is a beige, easily-cleaned, robust vinyl backing.
If you prefer to have a full wrap on your cushions they will be fully wrapped in the fabric you selected and won’t have the vinyl backing.
*Second to last picture shows the standard vinyl back of the cushion. If you would like a Full Wrap please also check “FULL WRAP ON CUSHIONS”
The standard cushions come with a beige vinyl backing. If you select to have a full wrap on your cushions they will be fully wrapped in the fabric of your choice. They will not have the beige vinyl back.
The valances are typically covered in the same material as the cushions however, a second fabric may be used. This could be one of the 7 standard ETI fabrics or a customer provided fabric. 3 yards are typically required.
*CHOOSE ONLY ONE FABRIC
Select your very own choice of fabric. Some conditions apply and our dedicated configuration specialists will be pleased to assist.
Many customers order through Sailrite or jtsoutdoorfabrics as they ship directly to Escape.
The standard cushions come with a beige vinyl backing. If you select the full wrap option, your cushions will be fully wrapped with the custom fabric of your choice.
This option gives you the ability to select a second fabric for your valances, that will compliment the fabric you have selected for your dinette cushions. 3 yds are required.
Upgraded batteries are essential for off-grid camping.
The first battery option is Dual 6V Deep Cycle Lead-Acid Batteries. These batteries store ~225Ah, making these ideal for those who go off-grid for long weekends. For reference, the standard 12V battery stores ~94Ah. One important thing to note is that Lead-Acid batteries can only discharge to half of their available capacity (~112 Usable Ah for Dual 6V Lead-Acid Batteries).
The next battery type is Lithium, of which you can choose up to four. These batteries offer a myriad of improvements over lead-acid: They last 3-5x longer, have a better power-density ratio (lighter), charge faster, and most importantly can discharge to a much lower level. The selection of a lithium battery will add a DC-DC Charger to facilitate proper charging from your batteries.
*CHOOSE ONE BATTERY OPTION ONLY
Converts battery power (DC/12V) to AC/120V (used in most household appliances) power in outlets. Primarily used when off-grid with no access to 120V Shorepower. Please note: Will not run the Air Conditioner. For that to operate, trailer must be connected to shore power or sufficiently sized generator (2200W minimum).
Includes transfer switch is wired to all interior 120V outlets
190W Solar Panels recharge batteries throughout the day to allow the user to camp off-grid for longer periods of time. Each panel provides 9.3A in ideal conditions. Compatible with Lead-Acid, AGM and Lithium batteries. Also includes a 30A solar charge controller to facilitate proper charging from the panels to the batteries.
The solar port adds a Zamp solar port below the belly band for use with a portable solar unit (commonly called a solar suitcase). Great feature to easily add increased solar capability in the case that your roof mounted solar panels are obscured from sunlight.
NOTE: This option is available when at least one solar roof panel is selected. Your portable solar panel must not include the charge controller. Your solar port will be wired to the roof mounted solar charge controller.
This pre-wire will make it much easier to add solar to your trailer after market, either for your own use or to improve the resale value of the trailer. This comes with the solar port for a portable solar panel. (not required if solar panel option selected).
The EMS and Surge Protector will protect your trailer from ‘bad’ sources of power (reverse polarity, power surges, black outs etc). This option will protect your trailer from the damage these ‘bad’ sources of power could cause.
This option adds a sealed port to the side of the trailer in which the provided 25’-30A Cord plugs into. Power cord can be easily removed/cleaned and can be stored anywhere, rather than the storage space inside the trailer. If the cord breaks it is far easier to replace the cord than splice in a new one.
Our Wireless Back-Up Camera offers enhanced visibility for your trailer, primarily aiding in precise parking maneuvers at your camping spot.
Additionally, it assists in lane changes, compensating for limited visibility between the driver and the rear of the trailer.
Note:
Customers choosing the Backup Camera option may require a 7-Pin adapter to facilitate seamless pairing with the monitor.
This precaution is necessary because certain newer tow vehicles emit signals that can interfere with the camera-to-monitor connection.
This plug-and-play solution ensures your wireless camera operates seamlessly by drawing unrestricted 12V power through your tow vehicle’s 7-way connector.
This bypasses any limitations imposed by power management systems found in some late-model trucks and SUVs.
Display monitor for vehicle wired with a 12V plug.
A 12V wire will be installed in the rear overhead cabinet. This will facilitate the installation of an aftermarket back-up camera.
Dometic 11,000 BTU – Includes Digital Thermostat and heat strip
Provides much-needed cooling in hot temperatures. This unit also includes a heat strip that will remove the chill from the air on a cool morning. Can be run from either shorepower or a minimum 2200W generator. Running: 1382W
Coleman Mach 10 NDQ 13,500 BTU (White Shroud) – Includes Bluetooth compatibility, heat strip, and soft start.
This is a quieter and more powerful AC as compared to the Dometic 11,000 BTU AC. While it doesn’t include the digital thermostat that the Dometic features, the Coleman Mach 10 can be operated via bluetooth or the buttons located on the unit itself. Includes a heat strip that will remove the chill from the air on a cool morning. Can be run from either shorepower or a minimum 2200W generator. Running: 1216W
Not available for the 17A or 17B.
*CHOOSE ONE AIR CONDITIONER ONLY
Add a second Maxx fan to the trailer when an air conditioner is not selected. This 12V 10-Speed MaxxFan can pull/push are in/out of the trailer and can be left open when driving and in the rain.
Max Fan open: height 8 ¾”
Max Fan closed: height 4 ¾”
Difference: height 4″
A spacer set is installed between the axle mounts and the trailer frame to lift the body up by 2-⅝”. Improves ground clearance for use in off-road situations.
Aluminum rims are an attractive alternative to steel. They are strong but lightweight and are resistant to rust and corrosion. Includes 5 tires and rims.
Available for E5.0, E21C, E21NE, and E19
The Power Awning Dometic 9500E is a nice, sleek awning that makes setup and teardown as easy as pressing a button on the remote. It includes an adjustable wind sensor that will automatically retract the awning under heavy winds.
Add a dimmable LED light strip under your awning to provide ambient light. Controlled by a remote.
Replace the standard clear lenses on the Exterior LED Lights with amber lenses. These lenses are less likely to attract bugs due to their warm light they emit.
– This package includes optional locations 1 and 3. Interior switch is wired to
these locations and standard P/S porch light. The other standard
locations are controlled individually on the LED light itself.
Adds a 12V outlet and two USB-A Outlets to the exterior of the trailer. These outlets are powered directly from the battery and thus will function when off-the-grid. It will be installed on the Passenger’s Side below the bellyband towards the rear of the trailer
6 gal. hot water tank heats water for use in the trailer. The Two-Way Hot water tank is fuelled by either Propane or 120V power. Additionally, you can run 120V and Propane concurrently to heat water fast.
The exterior shower is a great option for both full-service and off-grid camping. Each exterior shower will come with a hose but the quick-connect outlet is compatible with any quick-connect water appliance. Each side has a different use (for most). Driver side can be used to wash off the dog, hiking boots, kids, etc. while typically the passenger side is used as a dishwashing station. The primary benefit aside from having exterior access to water is that you won’t fill up your grey tank.
*CHOOSE ONE OR MORE EXTERIOR SHOWER(S)
1.5″ of spray foam insulation applied on top of everything on the underside of the trailer between the frame (with the dump valves, etc. left uncovered) will improve the shoulder-seasonality of your trailer. Also helps reduce ambient noise.
*CHOOSE ONE OPTION ONLY
Provides access to inside passenger side rear dinette bench storage area from outside. Hatch opening 16.5″ wide x 7.5″ high.
Sand pads are 5 1/2″ x 5 1/2″ metal “plates” that are bolted to the foot of the stabilizer jack. Set of 2 sand pads
The Number Pad Door lock (which includes a set of keys) will enable you to lock/unlock the trailer without the need to carry keys around. It is a great option for those with more people accessing the trailer than they have keys for.
Lower the exterior grab bar to just above the belly band. Helpful if you are shorter or have mobility issues.
Change the belly band color from black (standard) to white.
Top-hinged awning-style frameless windows add a sleek, modern look to your trailer while also being great for rainy climates. The rear frameless window is a vertically-split opening window and is included as a part of this package.
NOTE:
Add a frosted insulated window in the bathroom.
Switch out the non-opening framed rear window with a top-hinged, awning-style opening frameless rear window. The rear window is the only window that can be mixed and matched.
Have an additional sewer tube holder installed on your trailer for storage of sewer hoses, fishing rods, and more.
Start your Escape adventure ASAP with filled propane tanks. Only available to customers picking up from Escape or in Sumas.
ETI will install a customer provided Andersen King Pin Coupler Block ( 5th wheel hitch adapter) that you provide in advance to Escape.
Provides non-dimmable spotlight-like illumination which can be adjusted to suit your desired reading position. Please see the configuration guide for available locations.
LED Captain’s reading lights (pack of 4) dinette area in each corner driver’s side and passenger’s side.
Provides non-dimmable spotlight like illumination which can be adjusted to suit your desired reading position.
A 12V wire will be installed in the rear overhead cabinet. This will facilitate the installation of an aftermarket back-up camera.
Typically installed inside cabinets to make it easier for post production lights etc. to be installed inside those spaces. Escape to define locations.
Add additional 12V/USB outlets to the interior of your trailer. Includes one 12V outlet and 2 USB-A outlets. Please see the configuration guide for available locations.
*LOCATION 6 – Face of P/S overhead cabinet – at foot of bed
Add additional 120V outlets to the interior of your trailer. Includes two grounded 120V outlets.
Counter extensions are easily flipped up when needed and down when not. Please refer to the configuration guide for available locations.
*CHOOSE AS MANY COUNTER EXTIONS THAT WORK FOR YOU
Additional counter extensions and hardware – uninstalled. For that do it yourself project.
No custom sizing it must be from our standard list. Please refer to the configuration guide to determine which size counter extension fits which location.
These retractable wall hooks (3 per set) are great for coats, bathrobes, towels, dog leashes etc. Please refer to the configuration guide for available locations.
*CHOOSE ONE OR MORE LOCATIONS
Adds 3/4″ plywood between the paneling of your chosen wall, thus making it stronger for wall hooks, TV mounts etc. In most cases, reinforced walls are not necessary for the installation of ETI provided retractable wall hooks, counter extensions or TV arm. Please reference the configuration guide for available reinforced wall locations. Each reinforced wall will add 25lbs of weight.
Add up to two shelves in the wardrobe to increase the utility of the storage space. These will be evenly spaced. If shelves are added the hanging rod will be deleted.
*You can only have 1 Shelf if you choose 2 drawers in E19 / E21’NE
*CHOOSE ONE OR TWO SHELVES
Replaces existing countertop with a full-height cabinet. Great for additional storage.
The full-height cabinet at Drawer Stack (includes counter extension) does not include a hanging rod or shelf.
Choose between one or two shelves. Shelves are evenly spaced.
Convert the bench seat to a U-shape dinette. The U-Shape dinette is ideal for a lounge or reading space for two people. Dinette Table will be ~18″ shorter.
Most versatile table in terms of moving table top. Mounted on supporting arm attached to two steel brackets situated underneath dinette (rear bench). Only available with a u-shape dinette.
Increase the depth of ‘u-portion’ of the U-Shape dinette. Both the seat cushions and bench structure are increased from 18″ to 22″. The table length will be decreased by a corresponding 4″.
Vertically split the backrest down the middle for easier access to storage.
Vertically split the bench cushion to allow for easier removal of rear U-Shape seat cushions. This primarily benefits access to under-seat storage.
This will allow easier access of rear bench seat storage.
This options give you the opportunity to make your U-Shape dinette into a Lounge area. It extends the seating area
Can be added to Standard Dinette as well.
Pneumatic table leg makes it exceptionally easy to convert to/from a dinette/bed. To convert the dinette to a bed, simply unlock the levers, push the tabletop down and lock levers. Also includes the standard slider.
Leave the table mounting system uninstalled for an aftermarket installation.The standard table and mounting system will be shipped loose inside the trailer.
Escape mattresses are custom-ordered with rounded corners to fit the curvature of the trailer walls and are made slightly smaller than the bed area to allow for airflow around the mattress. Please verify that your desired aftermarket mattress will fit before deleting the stock mattress from your build.
This is a great option for people that would like to install their own carpet after market. OR for people with allergies.
Delete the door/drawer pulls from your build. The pilot holes will not be drilled and the hardware will not be supplied.
3-burner cooktop adds a stylish, modern look to the trailer with an eye-catching design. Does not include a glass cover.
*CANNOT COMBINE OVEN OPTION
This 3 burner/oven combination is a single unit. It comes standard with a stainless steel hood and features glass bi-fold stove cover which when retracted acts as a backsplash.
Delete the cooktop in the trailer.
(Gas line and 12V for iginition will be installed as normal. These cannot be removed.)
Convection Microwave Oven unifies the functions of both a microwave and an oven. Food can be heated/cooked in this unit with ease (think a pizza or something similar).
Installed beneath standard 2 burner cooktop or optional Eno 3 burner cooktop. Installation of Convection Microwave Oven eliminates storage space underneath the cooktop.
In the video we mention that when boondocking, it requires a minimum of 2 lithium batteries. However, 2 x 6 Volt Lead Acid Batteries will suffice (albeit with approximately 30% less power storage).
(Not available for E17A and E17B)
Made of hard, natural quartz sand particles and high-performance UV-stable acrylic resins, Elkay Quartz Luxe kitchen, prep/bar and laundry sinks are exceptionally durable and silky smooth. This makeup creates a hygienic, nonporous surface that resists germs.
Add a microwave installed in the pre-wired cabinet to the right of the fridge.
This give you the option to install your own microwave under the cook top after market. This will delete the standard microwave ready cabinet.
Modify cabinet under cooktop for customer-installed convection microwave oven. Does not include cabinet door.
Delete the range hood and exterior vent. Replaces range hood with a dome light.
Compressor fridges are both more efficient and effective as compared to the standard 3-Way (absorption) fridge. Additionally, they function much better at altitude and do not need to be level to run. However, compressor fridges are electric only and thus if you plan to boondock with a compressor fridge it would be advised to have ample solar/battery capacity.
Can be installed with or without exterior vents. The exterior vents do not affect the function of the compressor fridge and would only be used to facilitate the installation of a 3-Way fridge aftermarket.
Not available for the E17A or E17B due to size constraints.
*CHOOSE ONE OPTION ONLY
Delete the fridge from the trailer. Power and gas lines will be installed.
Stylish looking backsplash for easy cleaning. Installed behind the countertop for maximum longevity.
Rear of countertop only, not side.
The composting toilet is a great option principally for dry campers as it does not use any water. There are two receptacles for waste, one for liquid waste, and the other for solid waste. The liquid waste is simple, it needs to be emptied once it is full. As for the solid waste, you will fill the receptacle with some sort of medium (most commonly coconut husk). From there, after each us’ of the toilet the user will give the crank handle a few turns to move the waste/coconut husk around. This receptacle is vented to the outside of the trailer so there should be virtually no smell.
Including the Blank Tank, Piping & Black Tank Vent Stack makes it easier to add a regular RV toilet later on, improving the resale value of your Escape.
*CHOOSE ONE OPTION ONLY
Allows the user to connect campsite coaxial TV ports to their exterior coax port using a coax cable (not included). This port is wired to an internal coax port in the bed area. From there the user can plug their TV (not included) into said port using another coax cable. Selection of this option also includes an additional 120V outlet next to the interior coax port.
Does not include a TV.
This option adds a TV Antenna which enables the user to use their TV setup where hookups are not available. Terrestrial TV signal availability varies based on location.
Cannot be combined with a second solar panel (except on E5.0). Includes TV Ready with 120V Outlet.
*Does not include a TV.
This option is great for watching TV and listening to music. The Boss stereo features Bluetooth functionality, offers FM/AM radio alongside a CD/DVD player. It also has an 3.5mm AUX port, a USB-A port, as well as stereo audio ports.
Audio visual cable not included.
When the stereo is selected in the 21’NE, it is not possible to have the Captains Reading Light in location #3
| Trailer Base | $0 |
| Options Total | $0 |
| Total Weight | lbs |
The E5.0 is our lightweight 21’2” fifth-wheel trailer and is easily towed with a mid-size truck. Offers an extra high ceiling for a spacious feel.
conflicts with this option and has been removed.
